WTM Mahle Cyl 82.5 diameter for 1600 912
#1
Three Wheelin'
Thread Starter
WTM Mahle Cyl 82.5 diameter for 1600 912
Hi Guys
I posted this on the 912 forum but beklieve the 356 SC used the same cylinders.
I am searching for one Mahle Nikisil cylinder, ht group 6, but I'll consider any height with a very good bore in tolerance. My other cylinders measure around around 82.525 mm.
I also need an upper oil pump gear with shaft. Please pm or e-mail me with photos, jandsaustin1 at verizon.net
Thanks
I posted this on the 912 forum but beklieve the 356 SC used the same cylinders.
I am searching for one Mahle Nikisil cylinder, ht group 6, but I'll consider any height with a very good bore in tolerance. My other cylinders measure around around 82.525 mm.
I also need an upper oil pump gear with shaft. Please pm or e-mail me with photos, jandsaustin1 at verizon.net
Thanks
#2
Miserable Old Bastard
Rennlist Member
Rennlist Member
Can't help but I'd start by calling Jim at EASY (http://www.easypor.com/) and if he can't help you he'll know who can. Super nice and honest guy!