Brake Rotor Thickness for 996 Turbo?
#1
Racer
Thread Starter
Join Date: Jan 2003
Location: Was Orange County, CA now in Charlotte
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Brake Rotor Thickness for 996 Turbo?
Does anyone have the brake rotor thickness specs for new, minimum machined, and minimum for 996 Turbo?
#3
Racer
Thread Starter
Join Date: Jan 2003
Location: Was Orange County, CA now in Charlotte
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Just measured my rotors and found the Min. stamped on them too. Here's the thickness data:
Front Min: 32mm = 1.260"
Rear Min: 26mm = 1.024"
Mine measured 1.300" Front
and 1.075" Rear
I'm thinking that they're original rotors but I'm not sure. I have about 24000 miles on the clock. I bought it at 16900.
Front Min: 32mm = 1.260"
Rear Min: 26mm = 1.024"
Mine measured 1.300" Front
and 1.075" Rear
I'm thinking that they're original rotors but I'm not sure. I have about 24000 miles on the clock. I bought it at 16900.
#4
Addict
Rennlist Member
Rennlist Member
New they are 34 / 28.
Min after machining* is actually 32.6 / 26.6
*disc must be reworked symetrically, ie both sides evenly
Yep......wear limet is 32 / 26
I'd jotted this down long time ago.......probably credit Loren.
Min after machining* is actually 32.6 / 26.6
*disc must be reworked symetrically, ie both sides evenly
Yep......wear limet is 32 / 26
I'd jotted this down long time ago.......probably credit Loren.